Drying mode in the dryer
Industrial dryer control methods and drying principle
1, Industrial dryer is a washing equipment, usually in water after dehydration, used to remove clothes and other textiles in water. Most industrial dryers include a rotating drum, which is driven by a belt and hot air around the drum to evaporate moisture. The clothes drying cylinder is used in reverse roller drying mode to achieve the effect of not wrapping items.
2, industrial drying machine drying control methods are mainly two, one is knob time drying control, 20,40,60,80,100,120 minutes and the other quantitative time control, the user selects the quantity according to the amount of baking clothes. Time, drying control mode is relatively simple, practical and reliable performance, Europe and the United States and other countries mainly use this control. Different automatic control mode plus time control mode, thick clothes or thin clothes have different drying procedures to select from the sensor to automatically control the clothes that stop, more energy efficient, no damage to clothes for Japanese products, like Hong Kong representative and Southeast Asia use more .
3, industrial dryer is the use of heated air, the exhaust fan will heat the dry hot gas into the drying drum to dry clothes. The motor in an industrial dryer rotates at low speed using two drive belts, and the high-speed rotating exhaust fan rotates at low speed. The wet clothes are lifted and shaken in the drum using a tumble dryer. The exhaust fan comes from the bottom of the machine. The filter will pump a lot of fresh air, part of the air into the heater and heating, and the other part of the air into the hot air channel and high-temperature air mixing, forming a strong drying hot air is drawn into the drying drum for drying in the industry, the heat exchange through waste through the filter is discharged to the outside of the machine.
4, Household dryers usually use horizontal roller design, there are two styles, one is floor type, the other is wall mounted. Europe and the United States and other countries larger housing, used floor type, mainly placed next to the washing machine, the capacity is relatively large, dry dress 7kg or 10kg level. Japan and Hong Kong, as well as other smaller regions, have a wall mount, with a dryer bracket installed on the top of the washing machine, the capacity is relatively small, the dry clothes level is 3kg or 4kg.
5, industrial dryer, clothes dryer in the drying process to produce a large amount of high temperature steam discharge machine, so the large capacity machine installed in the room generally needs to be laid wet pipes will be discharged into the water steam, small capacity machine, even if not When laying wet pipes, the use of internal windows should be open for natural circulation. Italy launched a few years ago, washing and drying machine, industrial washing machine dehydration automatically during the drying process, using condensed water condensate treatment technology, is an advanced design concept, is the future development of the industrial direction of dryer. But due to the complex structure of the product, dear, there has not been much international development in recent years.
