Flatwork Ironer Washing Equipment
The first ironing machine is a type of washing equipment, usually having a single or double roller ironing machine, can be rotated by power roller, roller by steam or electric heating, when the wet clothes between the two rollers, time, temperature The roller can remove a lot of water, after Rolling out the grass will achieve an ironing effect.
With the improvement of people's living standards, washing clothes to improve at the same time, washing clothes after forming is also very important, and this time the ironing machine to achieve its role. Because the ironing machine is a washing machine belonging to laundry ironing equipment. Its main components are usually single, two rollers (a modern ironing machine may contain three rollers), the roller by manual or electric rotation, to a certain temperature, when the clothes get wet, a large amount of water can be removed through the two rollers, and to achieve the ironing effect . For sheets, tablecloths, fabric, etc. in the rolling process. The washing machine is mainly used in hotels, hospitals, factories and other places with a large flow of personnel, ordinary large laundry is also in demand, then we will share the use of ironing machines. First, keep your ironer clean and tidy: make sure the ironer uses a hot iron to clean the silver metallic sheen. Any other color can be dirty pure grass to bring hidden troubles.
Secondly, waxing: most ironing machine operators often do not wax too much, this amount is not enough. Experts say wax often, but enough is enough. Under normal conditions, apply wax once every 2-3 hours. If the wax is cool and soft, apply the wax powder; if the wax is hard, do not add wax.
Third, neutral pH: keep the pH between 6-7. A low pH will cause the grass to rub one roll and make a "screaming" sound.
Fourth, observe the ironing speed and feeding speed: the ironing speed and feeding at the end of a type of linen are closely related. For example, small pieces of fabric such as mouth tissue may run at 30 feet per minute (about 9 m/min), but this cannot be said to be the same speed.
Fifth, the temperature of flax water and hot tank: the temperature of the hot tank of the ironing machine is lower, which means that the amount of water in the grass should also be less to level it out. If the hot bed temperature is only 270ºF (132ºC) or even lower, the grass is easy to establish. The higher the temperature of the hot tank, the wetter the grass can be brushed.
